Work properly while you install a fresh socket and an innovative new breaker into the panel that is electrical
Q: i must alter a 220v receptacle up to a 110v. Will there be a way that is easy repeat this?
Ron, via email, None
A: Robert Marino, an electrician from Trumbull, Connecticut, replies: The brief response is that this will depend. Some specifics that are necessary kept from your concern. We’ll attempt to deal with them in talking about the changeover. But first, let us talk about electric tools and security
Electricians make use of a variety that is wide of tools. Usually, the essential difference between expert and amateur electric tasks are caused by the do-it-yourselfer not having the right tools. You may think are basic electrical projects, first put together a professional electrician’s tool kit if you are going to tackle even what. And don’t forget, you can not be secure enough when working around electricity, be sure that device kit includes a voltage/continuity tester and a voltage that is non-contact and learn to utilize them.
Now, we’ll assume that the 220v circuit under consideration is a committed circuit, which means it feeds just the 220v receptacle under consideration and that the cable begins in the electric panel or subpanel and stops during the 220v receptacle. The changeover is likewise somewhat various according to whether or not the 220v receptacle has been given by way of a cable that is two-wire and white cables) or even a three-wire cable (black, red and white cables).
The cable that is existing be 12-ga. or 10-ga. copper cable. Then purchase a 20-amp receptacle and a 20-amp single-pole breaker if so. prior to starting, turn fully off the primary breaker for the panel (in the event that panel has one). ensure that the 220v breaker at the panel that is electrical subpanel is in the off place and therefore the cables have now been disconnected through the breaker. (Note: Working around a panel that is electrical be specially dangerous. Continua a leggere